how to fix ink cartridge not recognized canon

How to reset a canon mx490 printer

Canon mx490 ink reset error shows the low or empty ink level and cannot print a file. You should skip this message by only pressing the OK button. The simple reset procedure can also be done. To do this, click the reset button of your printer or the Start Color button for a minimum time of 15 seconds. This post, however, offers you some basic and advanced methods to fix a canon mx490 reset ink level mistake.

Process 1. Remove the safety strips or the cartridge cover

The printer definitely would not accept the ink cartridge whether you have inserted the cartridges without removing its strips or covers. Let the cartridge out, loosen the protective bands gently and reinsert. Now try printing a file.

Process 2. In the right slot, place the Canon ink cartridge

You must position the cartridges in your allocated and defined slots. The printer clearly does not accept a cartridge when the black tin cartridge is put in the colored slot. Even, you can test that your canon printer uses the right cartridges. You should search the printer's manual for this.

Process 3. Remove the cartridge and clean the power connections

If the printer is now unable to recognize and locate the cartridge, delete the Canon ink cartridge from the printer. Using a clean towel or lint-free rag to scrub the contact chip gently. The touch chip helps to spot the tin cardboard. Make sure the touch chip is sterile and does not contain any dust particles.

Process 4. The "Print head cartridge" should be positioned in the right spot.

The cartridge is always flat or upside down for weeks or months with cartridges with written heads. As a result, no black or colored ink enters the print head and prevents the printing of the fresh ink cartridge. You must still wait until and until you see the tin flow in order to fix this problem. The tin cartridge must be separated from its slots. When the ink enters the print head the ink cartridges can be re-installed and printed.

Process 5. Reset the Ink Controller

You should reinstall the ink cartridges even after the electrical touch is cleaned if it doesn't fix the problem. Follow the measures correctly for that reason.

Firstly, detach the printer power cables. Strip the cable from the socket wall. Unplug all cables connected to your printer from USB and Ethernet.
Wait 30-60 seconds at least. And the control cable is reconnected to the wall socket.
You must now open the door of the cartouche. For a few seconds, push and hold the power button.
Close the cartridge door when retaining the power button. Delete the button then.
The printer and the ink cartridge will be reset.

These are the complete steps to your problem "how to replace ink cartridge canon Pixma".